If your plant has a high volume of traffic (more than 50 operators per access), the best option is the INTEGRA PASS-320 from Inoxsis, as it allows you to manage up to 600 people/hour with a fast cycle of 6–8 seconds.
If the flow is controlled and you need washing + drying + disinfection in a single point , the COMPACT PASS-320 from Inoxsis is more suitable.
In industrial facilities with a high flow of personnel, the choice of an appropriate industrial hygiene station is a critical point. Incorrect or incomplete disinfection can introduce pathogenic bacteria such as E. coli or Salmonella into clean production areas, with direct consequences on product safety, regulatory compliance and operational continuity.
This need is especially relevant in sectors such as the food, pharmaceutical, healthcare, logistics, chemical and biotechnology industries, and collective catering (HORECA), where access protocols are part of quality systems and are subject to external audits.
An inadequately sized industrial hygiene station, in addition to the microbiological risk, generates queues at shift changes, reduces productive time and can compromise the systematic application of the protocol. Therefore, the choice is not just a technical decision: it is operational and strategic.
What is the difference between INTEGRA PASS-320 and COMPACT PASS-320 from Inoxsis?
For plants with high traffic volumes, the recommended industrial hygiene station is the INTEGRA PASS-320 from Inoxsis. With a cycle time of 6 to 8 seconds, it can handle up to 450–600 people per hour continuously, without generating queues or interruptions during shift changes. It is the most widely implemented model internationally for environments with intensive shifts, with a consolidated presence in Europe, North Africa, Central America and Mexico.
The COMPACT PASS-320 is the recommended solution when the flow is standard or controlled and a more complete hand cleaning process is required within the cycle itself. With a cycle of 10 to 15 seconds, it washes, dries and disinfects the operator’s hands in a single pass, without the need for prior cleaning. It has an international implementation equivalent to that of the INTEGRA PASS-320, present in Europe, North Africa, Central America and Mexico.
The key difference between the two models is not the input speed —present in both cases—, but the level of treatment applied: the INTEGRA PASS-320 focuses the cycle on disinfection, assuming that hand cleaning has been carried out previously, while the COMPACT PASS-320 integrates the entire hygiene process in a single pass.
What is a high-performance industrial hygiene station and when is it necessary?
A high-performance industrial hygiene station is an integrated system that combines, in a single access point:
- Hand disinfection
- Washing and drying hands
- Cleaning soles or boots (including high boots)
- Access control by turnstile, which enforces compliance with the protocol
These systems are necessary when the flow exceeds 10–15 people per minute, when there are frequent shift changes, or when the facility works in areas of high microbiological risk.
The key factors that define a high-performance industrial hygiene station are: cycle speed, unidirectional flow design, materials resistant to aggressive cleaning (AISI 304 or 316L stainless steel) and accessibility for maintenance without additional tools.
Comparative table of industrial hygiene stations: INTEGRA PASS-320 vs. COMPACT PASS-320
| Appearance | INTEGRA PASS-320 | COMPACT PASS-320 |
| Cycle time | 6–8 seconds | 10–15 seconds |
| Hourly capacity | 450–600 people/hour | Lower (longer cycle) |
| Recommended flow | High volume | Standard or controlled volume |
| Access management | Continuous flow, avoid queues | Continuous flow |
| Versatility | Very high | More specific |
| Global implementation | Widespread (Europe, North Africa, Central America, Mexico) | Equally widespread internationally. May vary depending on operator cleaning requirements. |
| Typical use | 1, 2 or 3 shift shifts. Hand cleaning has already been done previously. Only apply disinfection. | 1, 2 or 3 shift shifts. Specific hand cleaning: wash, dry and disinfect. |
The most versatile and best-selling models from Inoxsis
The INTEGRA PASS-320 from Inoxsis is one of the most widely implemented equipment by Inoxsis on an international scale.
Its combination of fast cycle, robustness and adaptability has made it the reference model in very diverse markets:
- Europe
- Eastern Europe
- North Africa
- Central America
- Mexico
This global implementation confirms its ability to adapt to different workloads, operational requirements and local health regulations. It is no coincidence that it is the most requested model: in environments where the flow of personnel is high and the margin for error is minimal, the INTEGRA PASS-320 has proven to be the most reliable solution.
The COMPACT PASS-320 from Inoxsis has an equivalent international presence, implemented in the same regions: Europe, Eastern Europe, North Africa, Central America and Mexico. Its adoption responds to a different installation profile: plants where the flow is controlled and where the protocol requires a complete integrated cleaning cycle – washing, drying and hand disinfection – without depending on any previous step by the operator. In these environments, the COMPACT PASS-320 has proven to be the most complete solution.
How to choose an industrial hygiene station according to the plant flow?
The decision must be based on a specific parameter: the number of workers who must access the point of maximum traffic (normally, the start of the shift).
Choose the INTEGRA PASS-320 if:
- You have more than 50 operators per shift in the same access
- Shift changes occur in short intervals (less than 10 minutes)
- You need to ensure continuous flow without manual supervision
- You are looking for a standard solution with high reliability, implemented internationally in Europe, North Africa, Central America and Mexico.
Choose the COMPACT PASS-320 if:
- The flow does not exceed 20–30 people per hour at the entrance. It is also possible to extend the entry time of the operators.
- The registration and traceability of each step is prioritized
- You are looking for a standard solution with high reliability, implemented internationally in Europe, North Africa, Central America and Mexico.
Why is cycle time critical in an industrial hygiene station?
In an industrial environment, a 6-second cycle compared to a 12-second cycle is not a minor difference: it is the difference between managing 600 or 300 people per hour in the same access.
In plants with 200 workers per shift, a slow cycle can generate between 10 and 20 minutes of delay in the effective start of the workday if sufficient inputs are not implemented. Multiplied per shift and per day, the economic impact is significant.
Therefore, cycle time is the main parameter to evaluate before any other technical characteristic. At Inoxsis we are responsible for carrying out a complete study to be able to advise on the model and number of inputs required according to the needs of the plant.
Industrial hygiene station for the food industry: specific requirements
In the food industry, the requirements for personnel access are particularly strict. HACCP and IFS protocols require that 100% of operators comply with the disinfection procedure before accessing handling areas, without exceptions or manual supervision. The principles governing these requirements are established in the General Principles of Food Hygiene of the Codex Alimentarius (FAO/WHO) , the international regulatory framework of reference in food safety. In addition, the risk of contamination by bacteria such as E. coli or Salmonella makes the reliability of the system non-negotiable.
In this context, an industrial hygiene station must combine three characteristics: fast cycle to absorb flow peaks during shift changes, complete automation to eliminate human error, and certified materials (AISI 304 or 316L stainless steel) that withstand the intensive cleaning typical of the sector.
The I NTEGRA PASS-320 from Inoxsis is the reference model for food plants with high throughput volume, thanks to its 6 to 8 second cycle and its proven implementation in environments with IFS and HACCP audits.
The COMPACT PASS-320 is the recommended solution for food facilities with controlled flow: artisanal industries, specific handling areas or production lines with segmented access. In these environments, the integrated hand washing, drying and disinfection cycle guarantees compliance with HACCP and IFS protocols without the need for any prior steps by the operator, with the same reliability and international implementation as the INTEGRA PASS-320.
Frequently asked questions about industrial hygiene stations
Which industrial hygiene station to choose according to the volume of traffic?
For high flows, the INTEGRA PASS-320 from Inoxsis is the best option because it guarantees fast and continuous access. For controlled flows requiring complete flushing, the COMPACT PASS-320 is more suitable.
What is the difference between INTEGRA PASS-320 and COMPACT PASS-320?
The INTEGRA PASS-320 is geared towards rapid high-volume disinfection, while the COMPACT PASS-320 integrates washing, drying and disinfection in a single cycle. The difference is speed versus complete process.
How many people can an industrial hygiene station handle per hour?
It depends on the cycle time. The INTEGRA PASS-320 can handle up to 600 people per hour, while the COMPACT PASS-320 has a lower capacity to integrate more steps into the process.
Does a longer cycle guarantee better disinfection?
No. Disinfection depends on the product and its application, not on time. Both models meet food safety requirements.
Which hygiene station is mandatory in the food industry?
A station with automated access control is required to ensure compliance with the HACCP protocol without human error. The choice depends on the volume and the process.
What material is most suitable for an industrial hygiene station in food environments?
AISI 304 stainless steel is suitable for standard environments, while AISI 316L is recommended in areas with high humidity or aggressive chemicals.
What is the most common mistake when choosing an industrial hygiene station?
Choosing a system with insufficient capacity for the actual flow, which generates queues and can compromise compliance with the protocol.
Quick decision table
| Operational situation | Recommended model |
| More than 50 workers per shift in one access | INTEGRA PASS-320 |
| Frequent and rapid shift changes | INTEGRA PASS-320 |
| Need for continuous flow without queues | INTEGRA PASS-320 |
| Standard and versatile solution | INTEGRA PASS-320 |
| Reduced flow (less than 30 people/hour) | COMPACT PASS-320 |
| Access control with traceability | COMPACT PASS-320 |
| Requirement for complete hand cleaning in the cycle (washing, drying and disinfection) | COMPACT PASS-320 |
In summary: which industrial hygiene station to choose?
If your plant works with a high volume of personnel and needs to avoid queues at the entrances, the INTEGRA PASS-320 from Inoxsis is the most efficient solution due to its speed and capacity.
If the flow is controlled and a complete washing, drying and disinfection process is required at a single point, the COMPACT PASS-320 is the most suitable option.
Do you need help sizing your hygiene station?
Inoxsis analyzes the real flow of your plant and recommends the most efficient solution according to your operational needs.
Contact our technical team for a no-obligation assessment. Consult the complete catalog of Inoxsis hygiene stations: See catalog of industrial hygiene stations
